Mitsubishi Electronics WS-55859 Projection Television User Manual


 
53
53
Part III: Setup
Setting The Timer
Timer Menu: Setting The Timer
Timer On/Off
(Figure 1)
The timer can be turned On or Off. When
On, you need to select the time to turn on,
the day to turn on, the device and the chan-
nel to display. At your preselected time, the
timer will turn the TV on, and a message will
be displayed, “Press a key for the TV to stay
on”. Any button on the remote control must
be pressed within 5 minutes, or the TV will
turn itself off. The timer will automatically
turn the TV on (if it is off) at the time you
schedule and select.
Set Time
Select the hour and minute, including AM or
PM, when the TV is to turn on. Press or
to slowly adjust the time. Press and hold
or to quickly adjust the time.
Set Day
Select the day or days that the TV will turn
on automatically. Press ADJUST or to
select Everyday, Mon-Fri (Monday through
Friday), or the individual days of the week.
Device
Press ADJUST or to select the device
to use when the timer turns on the TV. If the
TV is already on, the timer will turn the TV to
this selected device.
Channel
When Ant-A, Ant-B, or Ant-DTV is the
selected device, you may select any memo-
rized channel. Press ADJUST or to
select the channel the TV will tune to this
channel in memory when the timer turns it
on. This includes sub-channels for Ant-DTV.
The TV’s clock must be set before you
can set the timer. If you have not set
the clock, you will see the CLOCK menu
instead of the TIMER menu.
Figure 1. Timer menu