Eizo FS2331 Flat Panel Television User Manual


 
16
Chapter2AdjustingScreens
To perform advanced adjustments
The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
Perform the range adjustment rst when adjusting color for analog signals (see “To adjust color gradation
automatically “Auto Range Adjust”” (page 25)).
The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.
Note
The value shown in “K” is available only as reference.
Using the “ScreenManager Pro for LCD (DDC/CI)” allows you to perform the color adjustment by using the mouse
and keyboard of your PC. (Refer to “Chapter 4 Color Adjustment” in the User’s Manual for “ScreenManager Pro for
LCD (DDC/CI)”.)
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
For instructions on how to adjust or set each function, refer to subsequent pages.
√: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
sRGB Paper Game Cinema
Brightness
BlackLevel - -
Contrast - -
Saturation - -
Hue - -
Temperature -
AdvancedSettings ContrastEnhancer - -
PowerResolution - -
Gamma - - -
Gain - - - -
Overdrive - - -
ColorReset