32
Chapter4PowerSavingFunctions
Chapter 4 Power Saving Functions
4-1. Setting Power Saving “Power Save”
●
Monitor
This function allows you to specify whether to set the monitor into the power saving mode, depending on the
state of an external device connected to it. When the monitor has shifted to the power saving mode, the
images on the screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
• Power consumption varies even when the stereo mini jack cable is connected.
Note
• The monitor changes to the power saving mode about 15 seconds after the signal input ceases to be detected.
Procedure
1. Choose “PowerManager” in the Setting menu, and press
.
2. Choose “Power Save” in the “PowerManager” menu, and press
.
The “Power Save” menu appears.
3. Select “Enable” or “Disable” with or .
4. Press
to exit the adjustment.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
PC Monitor Power Indicator
On Operating Blue
Powersaving
mode
STAND-BY
SUSPENDED
OFF
Powersavingmode Orange
PowerOff Powersavingmode Orange
Digital Signal Input
When the external device connected is a PC
This monitor complies with the DVI DMPM standard.
PC Monitor Power Indicator
On Operating Blue
Powersavingmode Powersavingmode Orange
PowerOff Powersavingmode Orange
When the external device connected is not a PC
Ext. Device Monitor Power Indicator
PowerOn Operating Blue
PowerOff Powersavingmode Orange