Filter
Top Products
42
Chapter7Reference
7-2. Attaching the Stand base
The once removed the Stand base can be attached to the monitor again with the following procedures.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Attach the Stand base.
Hold the Stand base with the arrow “ ” facing upward, align the two holes (a) of the Stand base with the two
tabs (b) at the bottom of the monitor, and snap the tabs into the holes.
b
a
3.
Turn the supplied screw in the “LOCK” direction to lock the Stand base.
Tightenscrew,thenpressknobflat.
7-3. Displaying Monitor Information “Information”
This function allows you to display the model name, serial number, usage time, resolution, and input signal.
Procedure
1. Choose “Information” in the Setting menu, and press
.
The “Information” menu appears.
Attention
• The usage time is not always “0” when you purchase the monitor due to factory inspection.