NeoDigits.com X5000 HD DVD Player User Manual


 
Use the HDMI cable to connect the player to the HDMI input of your display. When a
HDMI output resolution is selected your X5000 will output both video and audio.
If you wish to use a DVI connection instead of HDMI, you can connect to your TV using a
HDMI to DVI converter cable.
If using DVI, you will have to connect your sound system separately using the supplied
audio cable to connect to your TV
Or
You can connect the X5000 sound output to your AV receiver using Stereo, 5.1 Surround
or digital audio connections (coaxial / optical).
C. Component connection
The following resolutions are available via component connection:
PAL, NTSC, 480p, 576p, 720p, 1080i, 720p/50hz, 1080i/50hz and 1080p.
Insert one end of the component video (Y / Cb / Cr) into the red / blue / green socket of
the component video output located on the rear of the player. Insert the other end of the
cable into the component video input socket located on your TV / display.
Use the supplied audio cable to connect the player to the TV
Or
You can digital audio connection (coaxial / optical) or 5.1 channel connection to your AV
receiver