Filter
Top Products
computer in the same network, but for the last segment, enter any number between
(10~254) – make sure there are no other computers in the LAN using the same number
as what you inter into this last segment
* You can check the “appendix” section for checking the IP address of the computer in the
LAN.
To setup wireless connection
1. Turn on the HELIOS X5000 player
2. Click the “Setup” button on the remote control to enter the setup menu
3. Under “Wireless” Î “preferred network”, change to wireless network.
4. Reboot the player.
5. Repeat 2, under “wireless”, set up the SSID, encryption and other parameters of your
wireless LAN settings.
How to install NeoLink server software on your computer
The HELIOS X5000 is able to access computers on your LAN/ WLAN and play content
therein. To do so, however, you will need to install the NeoLink Server software on your
computer(s).
The server software can be downloaded from the link below:
http://www.neodigits.com/download/NeoLink.zip
When installing the software, ensure that your firewall or Windows XP firewall will not
prevent you from downloading this software. Remember to open the TCP/ IP port 8000.
Refer to Windows documentation for instructions if needed.