Onkyo DV-CP706 DVD Player User Manual


 
20
Connecting the DV-CP706
—Continued
Notes:
Before making any connections, turn off the
DV-CP706 and your TV and disconnect their power
cords from the wall outlets.
Also refer to the connection information supplied with
your TV.
Connect the DV-CP706’s video outputs directly to
your TV. Don’t connect a VCR or other video equip-
ment in between your DV-CP706 and TV. Doing so
may result in picture distortion, because of the copy
protection system used on DVD-Video discs.
When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP706’s ANALOG AUDIO OUTPUTs to a pair of
analog audio inputs on your AV receiver, as shown.
Digital Connection
To enjoy Dolby Digital or DTS surround sound, you
need to connect one of the DV-CP706 digital audio out-
puts to the digital input on a Dolby Digital or DTS
decoder or an AV receiver with built-in decoders.
Use an optical (or coaxial) digital audio cable to connect
the DV-CP706’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your AV receiver, as shown.
Notes:
Make sure that the Digital/HDMI Audio Out setting
on the Audio menu is set to All (see page 46). Other-
wise, you won’t get surround sound.
Also refer to the connection information supplied with
your AV receiver or decoder.
When playing Dolby Digital or DTS source material,
be sure to select Dolby Digital or DTS decoding,
respectively, on your AV receiver or decoder. See the
relevant manuals.
•You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
This section explains how to connect the DV-CP706 to a
stereo amp for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP706. DVD-Video discs will
sound better too.
Connecting an AV receiver
When the HDMI Output setting is set to On (see
page 45), the DV-CP706 cannot output progres-
sive video. To output progressive video, you must
set the HDMI Output setting to Off (see page 45),
and set the Progressive setting to Progressive (see
page 45).
When the Progressive setting is set to Progressive
so that progressive video is output by the COM-
PONENT VIDEO OUTPUT, and the PRGV indi-
cator is shown, nothing is output by the VIDEO
(composite video) and S VIDEO (S-Video) out-
puts. To output video from these outputs, you
must set the Progressive setting to Interlaced (see
page 45).
The Progressive can also be changed by pressing
and holding the Previous [ ] button, and then
pressing [ON/STANDBY] button.
L
R
ANALOG
AUDIO
OUTPUT
L
R
ANALOG
INPUT
RCA/phono cable
(white)
(white)
(red)
(red)
Signal flow
Connecting a Stereo Amp
Connect one or
the other
Coaxial
digital
cable
(supplied)
Optical
digital
cable
Signal flow
AV component with
Dolby Digital/DTS decoder
OPTICAL
COA
XIAL
COAXIAL
OPTICAL