Filter
Top Products
39
Advanced Playback
—Continued
Deleting Items from the List
Editing Steps
•
Deleting the memory list:
Press the Stop button to stop playback of the memory
list, and while “Memory” is displayed on-screen,
press the [CLR] button. The memory list is deleted and
“Memory Clear” is displayed on-screen.
Note:
• The entire memory list is cleared when the DV-CP706
is set to Standby.
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle lan-
guages that you were using.
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s set-
tings are lost.
• The Last Memory function will not work while a
menu is being displayed on-screen.
• The Last Memory function may not work with some
DVD-Video discs.
•Even if you select another disc, or inadvertently turn
off the DV-CP706 during playback, you can resume
playback from the same point when you select the disc
again.
To delete an item, use the Up/
Down [ ]/[ ] buttons to select it,
and then press the [CLR] button.
The item is deleted and subsequent
items move up the list.
1
To edit a step, use the Up/Down
[ ]/[ ] buttons to select it, edit
the disc, title/folder, and chapter/
track numbers, and then press
the [ENTER] button.
2
To close the Memory Play Setup
window, press the [RETURN] but-
ton.
Using Last Memory
Remote controller
Remote controller
Remote controller
DVD
1
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the dis-
play.
If the [LAST MEMORY] button is
pressed again, the last memory point
will be updated.
2
To stop playback, press the Stop
[] button once or twice.
At this point you may choose to
play another disc, or to turn off
the DV-CP706.
3
To resume playback, select the
disc and press the Play [ ] but-
ton.
The Last Memory dialog box appears,
as shown.
4
To resume playback from last
memory point, select “Yes,” and
then press [ENTER].
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
Remote controller
Remote controller
Remote controller
Last Memory is set.
Start playback from memory location ?
Ye s No Memory Clear
Remote controller