Filter
Top Products
14
VIDEO OUT
S VIDEO
R
L
ANALOG
OUTPUT
PCM/AC-3
DIGITAL
REMOTE
CONTROL
COAXIAL OPTICAL
YCbCr
Enjoying Dolby Digital Sound
• DO NOT connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the PCM/AC-3 DIGITAL AUDIO OUT jack of the
DVD player.
• Connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Dolby Digital Receiver
or Processor.
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be
damaged.
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby
Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Rear speaker
(left surround)
Connection
example
Center
speaker
Rear speaker
(right surround)
Sub woofer
coaxial cable
To PCM/AC-3
DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Amplifier equipped with a
Dolby Digital decoder
TV
Front speaker
(right)
Front speaker
(left)
Standard equipment to
enjoy Dolby Digital
• The DVD player (equipped
with an AC-3 output jack)
• DVD video discs recorded
in Dolby Digital
• 6 channel amplifier
equipped with a Dolby
Digital decoder, or Dolby
Digital processor and
power amplifier
• 5 speakers and 1 sub
woofer
Signal flow
Video cable
To
VIDEO
OUT
Connecting to Optional Equipment
Notes:
■ Setting of the output
sound type
• From the on-screen
displays, set the “AUDIO
OUT SEL.” to “AC-3”.
31 , 32
• Select the sound recording
system of the disc to “AC-
3” on the audio setting
indication. 27
Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby,” “AC-3,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Optical digtal cable
To OPTICAL type digital audio input
To COAXIAL type
digital audio input
Connect either.
When connecting the optical digital cable, remove the cap and
fit the connector into the jack firmly. When not using the jack,
keep it capped to protect it from dust intrusion.
To video input