Filter
Top Products
38
EN
O
PERATING DVD
SPECIAL SETTINGS
Subtitle Language
DVD
This unit allows you to select a subtitle language (if available) during DVD
playback.
1
During playback, press [SUBTITLE] repeatedly until the
desired language appears.
1.ENG/6
Subtitles can be varied on
the displayed number.
Current subtitles language.
• Each time you press [SUBTITLE], the subtitle lan-
guage changes as example below.
OFF (no subtitles)
ENG (English subtitles)
FRE (French subtitles)
...
To cancel the subtitle
1
During playback, press [SUBTITLE] to display the sub-
title display.
1.ENG/6
2
Press [ B] button to set “OFF“.
OFF
NOTE:
• If your language is not shown after pressing [SUBTITLE] sever-
al times, the disc may not have that language. However, some
discs allow you to change subtitle languages setting in the disc
menu. (Operation varies depending on the disc, so refer to the
manual along with the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has 3-letter-language code, the
code will be displayed every time you change the subtitle lan-
guage setting. If you choose any other languages, “---” will be
displayed instead. (Refer to page 44.)
-
Audio Language
DVD
This unit allows you to select an audio language (if multiple languages are
available) during DVD playback.
1
Press [AUDIO] repeatedly until the desired language
appears.
1.ENG
Dolby D
3/2.1ch 48k/3
Audio can be varied on
the displayed number.
Current audio language.
5
• Each time you press [AUDIO], the audio language
changes as example below.
ENG (English audio)
SPA (Spanish audio)
FRE (French audio)
...
NOTE:
• Some discs will only allow you to change the audio setting
from the disc menu. Refer to the manual accompanying the
discs for details.
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language. However, some
discs allow you to change multiple audio languages setting
in the disc menu. (Operation varies depending on the disc, so
refer to the manual along with the disc.)
• When “NOT AVAILABLE“ appears on the TV screen, it means
audio language is not available.
Camera Angles
DVD
Some DVD discs may contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle if “ ” appears on the screen. If the “ANGLE ICON”
setting is “OFF” in the OTHERS menu, “ ” will not appear.
(Refer to page 43.)
1
During playback, press [ANGLE] repeatedly until the
desired camera angle appears.
1 / 8
Black Level Setting
DVD
Adjust the Black Level Setting to make the dark areas of the TV picture
brighter.
1
During playback, press [MODE] repeatedly until the
“ “ appears.
OFF
2
Press [ENTER] to adjust the black level.
ON
ON :Makes the dark areas brighter.
OFF :Shows the original picture as recorded.
3
To exit the Black Level setting, press [BACK/RETURN].
NOTE:
• The setting will be kept even if the unit is turned off.
L4360UA.indd 38L4360UA.indd 38 2006/11/21 15:41:502006/11/21 15:41:50