Filter
Top Products
47EN 47EN
Disc
Management
Recording
PlaybackIntroduction Connections Basic Setup Editing Function Setup Others Español
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
8
Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 76.)
Wait for a moment 90%
This operation may take
awhile to be completed.
7
Press [REC/OTR] to start recording.
The “I HDD” or “I DVD” mark will be displayed
on the TV screen briefly.
I
DVD
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC/OTR] again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC/OTR] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
(normal recording)
8:00 7:30
1:00
I
0:30
• To change the recording length during one-touch
timer recording, press [REC/OTR] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
• When you press [REC/OTR], recording starts immediately and continues until the HDD or disc is full, record 12
hours to HDD or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program onto HDD / DVD-RW/-R, you have to select the TV channel audio beforehand. Only
the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power (One-touch timer recording will be canceled.).
- Using [REC/OTR] on the remote control.
• You cannot use the pause function during one-touch timer recording.
E2M20UD_H2160SL9_EN.indd 47E2M20UD_H2160SL9_EN.indd 47 2008/02/20 15:32:542008/02/20 15:32:54