Sylvania H2160SL9 DVD Recorder User Manual


 
60 EN60 EN
5
Use [K / L / s / B] to select a desired
title, then press [ENTER].
e.g.) HDD Original
Title List
1 / 6
ABCDE
12:00AM (10:00:00) JAN/ 1/08
CH10 SP
1
4 5 6
2 3
ORG
The title is now registered in the dubbing list.
6
Repeat steps 4 to 5 until you register
all the titles to be dubbed.
To delete a title:
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
3 Use [K / L] to select “Yes”, then press
[ENTER].
To move a title:
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [ENTER].
2 Use [K / L] to select “Move”, then press
[ENTER].
3 Use [K / L] to select a desired insert point,
then press [ENTER].
To erase all the titles in the dubbing title list:
1 Use [K / L] to select “Delete All” in the
dubbing menu, then press [ENTER].
2 Use [K / L] to select “Yes”, then press
[ENTER].
Final confirmation message will appear.
3 Use [K / L] to select “Yes”, then press
[ENTER].
• To go back and forth between dubbing menu
and dubbing list, use [s / B].
7
After adding all the titles you want,
use [K / L] to select “Dubbing Start”
in the dubbing menu, then press
[ENTER].
8
Use [s / B] to select a desired
recording mode, then press [ENTER].
e.g.) HDD DVD
HDD DVD
3000 MB
500 MBDubbing Titles
Please select REC MODE.
LP EP SLP AutoHigh XP SP
Confirmation message will appear.
• When dubbing from HDD to DVD or from VR
mode DVD-RW to HDD, you can select “High”
to perform the high speed dubbing (refer to
“Recording Mode for Dubbing” on page 58 for
more details).
9
Use [K / L] to select “Yes”, then press
[ENTER].
Start Dubbing?
Yes
No
If dubbing continues when timer recording
starts, the next display will appear.
There are Timer Programming
Start Dubbing?
Yes
No
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
DUBBING
One-touch Dubbing...
With one-touch dubbing, you can start dubbing right
away with just one touch.
To dub the contents in a DVD which is finalized on
other unit, use this function.
During playback of the title you want to dub, press
[DUBBING].
If you are playing back a DVD, DVD to HDD dubbing
will start right away.
If you are playing back HDD, HDD to DVD dubbing will
start right away.
• The dubbing will start from the beginning of the title
being played back.
• The unit will dub only the title being played back.
• When dubbing from HDD to DVD or VR mode DVD-RW
to HDD, recording mode will automatically be set to
“High” whenever the conditions are met. (See page 58.)
• If the high speed dubbing is not available, the title
will be dubbed in normal speed with the recording
mode of the title.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.
E2M20UD_H2160SL9_EN.indd 60E2M20UD_H2160SL9_EN.indd 60 2008/02/20 15:33:112008/02/20 15:33:11