Filter
Top Products
51EN 51EN
Disc
Management
Recording
PlaybackIntroduction Connections Basic Setup Editing Function Setup Others Español
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [POWER].
2) Press [TIMER PROG.].
3) Check the information on the list you want to edit.
Timer Programming
1/1
TUE JAN/01 10:00AMSP (1:00)
JAN/ 2/08 12:00 AM 125-01 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV 125- 1
New Program
4-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
3 Use [K / L] to select “Yes”, then press [ENTER].
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
5) Press [TIMER PROG.] to exit.
Press [C STOP] on the front panel of the unit or press
and hold [STOP C] on the remote control for 2
seconds.
Note
• Press [TIMER PROG.] to check the timer recording in
progress.
To stop the timer recording in progress
Timer Programming
1/1
TUE JAN/01 10:00AM
Date Start End CH
E40
JAN/02 12:00AM 1:00AM DTV 125- 1
New Program
Each error number means:
E1-22
E37-39
Recording error other than below
E25-26 Copy prohibited program
E30 Disc full
E40 Some portion has not been recorded because of
program overlapping. Recording did not start at the
start time.
E41 Power failed
E47 Already 600 titles recorded on the HDD
E49 There was no disc space on the HDD at the starting
time for the HDD timer recording.
E50 HDD recording is canceled due to the insufficiency of
the disc space on the HDD.
• E23-24, E27-29, E31-36, E42-46 and E48 are not
displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
the channel will be decided as soon as you enter the channel number.
Digital TV
For major channel number 1-9, press [B] or [ – ] to decide the major channels. For other major
channels (10-99), the major channel will be decided as soon as you enter the major channel number.
Digital CATV
For major channel number 1-13, press [B] or [ – ] to decide the major channels. For other major
channels (14-135), the major channel will be decided as soon as you enter the major channel number.
minor channels
For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting is existing.
[K / L] does not skip the non-existed minor channels.
E2M20UD_H2160SL9_EN.indd 51E2M20UD_H2160SL9_EN.indd 51 2008/02/20 15:32:592008/02/20 15:32:59