Filter
Top Products
Connecting the AC cord plug to the Plasma Display.
For TH-103VX200U
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 12)
Remote Control
Sensor
Power Indicator
Right side surface
Main Power
On / Off Switch
Connecting the plug to the Wall Outlet.
Note:
For TH-103VX200U
When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the
set on: Power-On.
Power Indicator: Green
Press the button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the switch on the unit,
when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
17
Power ON / OFF