Filter
Top Products
25
To view the 3D images
Viewing 3D images
To view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with 3D effect
Connect the 3D-compatible player via an HDMI cable (see page 14) and playback the contents.
• Use fully wired HDMI compliant cable.
• For the settings of the player, read the manual of the player.
• If you use the non 3D-compatible player, the images will be displayed without 3D effect.
To view the contents of 3D formats other than Frame Sequential with 3D effect.
Match the picture format in “3D INPUT FORMAT” (see page 47) before viewing.
• You can view “SIDE BY SIDE” and “TOP AND BOTTOM” with 3D effect even if you use the non 3D-compatible player.
• Please consult the suppliers of contents or programmes for availability of this service.
Turn the 3D Eyewear on
• Press the power button on the 3D Eyewear for about 1 second. (see page 23)
Put on the 3D Eyewear
• If the 3D Eyewear slips out of place, hold it in place using the specialised band, and adjust the length of the band.
(see page 24)
Watch the 3D images
To turn the 3D Eyewear off■
After using the 3D Eyewear, press the power button on the 3D Eyewear for about 1 second to turn it off. (see page 23)
Notes:
• If the room is lit by fl uorescent lights (50 Hz) and light appears to fl icker when using the 3D Eyewear, switch off the
fl uorescent light.
• 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
• Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as computer
screens, digital clocks or calculators, etc.) may be diffi cult to see while wearing the 3D Eyewear.
• Do not use the 3D Eyewear as sunglasses.
• 3D effects may be perceived differently depending on the person.