Filter
Top Products
– 46 –
Setup (setting) menus
SYSTEM menu
<SYSTEM>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
00 ENCODER 0000 REMOTE
SEL
0001 LOCAL
01 SYS SC 0000 –127
..
..
..
0127 0
..
..
..
0255 128
02 SYS H 0000 –108
..
..
..
0108 0
..
..
..
0216 108
03 VIDEO 0000 –32
..
..
PHASE . .
0032 0
..
..
..
0064 32
04 SCH 0000 0
COARSE 0001 90
0002 180
0003 270
05 SCH FINE 0000 –32
..
..
..
0032 0
..
..
..
0064 32
06 AV PHASE 0000 –100
..
..
..
0100 0
..
..
..
0200 100
07 SYS H 0000 FULL
RANGE
0001 FINE
The underline on the setting item denotes the initial setting.
This selects whether the video output signal is to be adjusted
on the VTR or with the external encoder remote control.
0: Video output signals are adjusted with the external encoder
remote control.
1: Video output signals are adjusted on the VTR.
System phase adjustment: Total variable range: ±180° or
more
–: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
System phase adjustment: 74 ns steps
–: Advanced
+: Delayed
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
Video phase adjustment: 148 ns steps
–: Advanced
+: Delayed
SCH phase adjustment: 90° units
–: Advanced
+: Delayed
(The S and C phases change but the H phase does not
change.)
SCH phase adjustment: Total variable range: ±45° or more
–: Advanced
+: Delayed
(The S and C phases change but the H phase does not
change.)
This adjusts the audio output phase with respect to the video
output: 20.8
µ
s steps
–: The audio output phase is advanced with respect to the
video output.
+: The audio output phase is delayed with respect to the video
output.
This selects the adjustable range for SYSTEM H during when
the ENCODER REMOTE is connected.
0: ±8
µ
sec (±30 seteps)
1: –1.9 to +2.7
µ
sec (–7 to +10 steps)
<Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.