Filter
Top Products
– 53 –
USER menu
<EDIT> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
308 EDIT 0000 N-DEF
RPLCE4 0001 CH1
0002 CH2
0003 CH1+CH2
309 EDIT 0000 N-DEF
RPLCEC 0001 CH1
0002 CH2
0003 CH1+2
310 CONFI 0000 OFF
EDIT 0001 ON
311 AUD EDIT 0000 CUT
IN
0001 FADE
312 AUD EDIT 0000 CUT
OUT
0001 FADE
313 AUTO 0000 DIS
ENTRY 0001 ENA
314 CF ADJ 0000 PLAYER
SEL 0001 RECORD
315 AFTER 0000 STOP
CUE-UP 0001 STILL
316 JOG RANGE 0000 –.43~1
0001 –4~+4
The underline on the setting item denotes the initial setting.
The same type of setting as No. 305. This selects the channel
concerned when the VTR CH4 edit preset is set in compliance
with the ON or OFF presetting for the analog audio signals
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
This selects whether to conduct simultaneous playback while
editing is in progress.
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit IN
point.
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
OUT point.
0: Cut processing
1: V Fade processing
This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
editing.
0: The player’s edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder’s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
0: STOP mode
1: SHTL STILL mode
This sets the range of the JOG speed during 9P remote
operation.
0: Plays at –0.43 to +1 speed range
1: Plays at the ±4.1 speed range