Filter
Top Products
– 56 –
Setup menus
USER menu
<VIDEO>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
600 INT SG 0000 OFF
0001 BB
0002 CB
601 OUT 0000 N-VF
VSYNC 0001 VF
602 V-MUTE 0000 N-MUTE
SEL
0001 LOW RF
603 CC (F1) 0000 BLANK
BLANK
0001 THRU
604 CC (F2) 0000 BLANK
BLANK
0001 THRU
605 FREEZE 0000 FIELD
SEL 0001 FRAME
606 OUT C 0000 B/W
KILL
0001 COLOR
607 V OUT 0000 THRU
SETUP 0001 ADD
608 SDI OUT 0000 COMPNT
SEL 0001 COMPST
609 EDH 0000 OFF
0001 ON
610 PB/PR 0000 MII
IN LV 0001 B-CAM
611 INPUT 0000 B/W
C KILL
0001 AUTO
612 IN FRM 0000 FORCED
DET
0001 AUTO
The underline on the setting item denotes the initial setting.
This selects whether to generate the internal signal.
0: Signal is not generated.
1: The black burst is generated.
2: 100% color bars are generated.
This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
This selects whether the video output signal is set to MUTE
when LOW RF is detected during playback.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed caption signal in the
first field.
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed caption signal in the
second field.
0: Forced blanking performed.
1: Blanking not performed.
This selects the freeze mode for still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma color killer processing for the video output
signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the composite output signal.
0: The signal is output without setup.
1: The signal is output with 7.5% setup.
<Note>
This setup menu is not displayed in the 625 mode.
This selects the SERIAL OUT signal format.
0: The component 4:2:2 signal is output.
1: The composite signal is output. (option)
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the component input signal level.
0: MII level.
1: ß cam level.
This selects color killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the conditions under which frame detection is to
be performed when signals are input.
0: Frame detection is performed at all times.
1: Frame detection is prohibited only when non-standard
signals are input.