Filter
Top Products
– 60 –
Setup menus
USER menu
<AUDIO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
727 PB FADE 0000 AUTO
0001 CUT
0002 FADE
728 EMBEDDED 0000 OFF
AUD
0001 ON
729 MONITOR 0000 OFF
MIX L 0001 CH1+2
0002 CH3+4
730 MONITOR 0000 OFF
MIX R 0001 CH1+2
0002 CH3+4
731 CUE OUT 0000 OFF
SEL 0001 ON
The underline on the setting item denotes the initial setting.
This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
0: According to the status during recording.
1: Forced CUT
2: Forced FADE
This selects whether to superimpose the audio data onto the
serial output.
0: Data is not superimposed.
1: Data is superimposed.
This selects the mixed signal for the headphone monitor.
0: No mixing.
1: CH1 and CH2 are mixed and output to the left channel.
2: CH3 and CH4 are mixed and output to the left channel.
This selects the mixed signal for the headphone monitor.
0: No mixing.
1: CH1 and CH2 are mixed and output to the right channel.
2: CH3 and CH4 are mixed and output to the right channel.
This selects whether or not the cue audio signal is to be output
to the main line output in the search mode.
0: CUE AUDIO is not output.
1: CUE AUDIO is output.
(This applies only when setup menu No. 721 (MONI CH
SEL) is not set to “MANU”.)
AJ-PD950 USER menu
The following setup menu is displayed when the AJ-PD950 is used.
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
012 SYS 0000 422
FORMAT 0001 411
0002 420P
608 SDI OUT 0000 COMPNT
SEL 0001 COMPST
0002 420P
The underlining indicates the factory setting.
This sets the unit’s recording/playback format.
0: The 422 (50M) format is selected.
1: The 411 (25M) format is selected.
2: The 420P format is selected.
<Notes>
•
Editing is not possible in the 411 mode.
•
In the 625 mode, 420P cannot be selected.
This selects the SERIAL OUT signal format.
0: Component 4:2:2 signals are output.
1: Composite signals are output. (Option)
2: Component 4:2:2P signals are output.