– 57 –
USER menu
<VIDEO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
613 VIN SETUP 0000 THRU
0001 CUT
614 Pb/Pr OUT 0000 MII
LV 0001 B-CAM
617 WFM SEL 0000 CTL
0001 TC
0002 VIDEO
0003 SYNC
0004 RF-L
0005 RF-R
0006 ENV-L
0007 ENV-R
The underline on the setting item denotes the initial setting.
This selects whether the composite signal is to be recorded
with setup or without setup.
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Notes>
•
This setup menu is not displayed in the 625 mode.
•
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
This selects the analog component output level.
0: MII level
1: ß-CAM level
<Note>
This setup menu is not displayed in the 625 mode.
This selects the signal to output from the VIDEO OUT2
connector.
0: The CTL signal is output.
1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
3: The SYNC signal is output.
4: The PB L RF signal is output.
5: The PB R RF signal is output.
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
