Filter
Top Products
– 48 –
Setup menus
USER menu
<BASIC> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
009 CHARA 0000 0
..
..
H-POS . .
0005 5
..
..
..
0012 12
010 CHARA 525 mode
V-POS 0000 0
..
..
..
0018 18
..
..
..
0022 22
625 mode
0000 0
..
..
..
0023 23
..
..
..
0028 28
011 CHARA 0000 WHITE
TYPE 0001 W/OUT
012 SYS 0000 422
FORMAT 0001 411
013 PB FORMAT 0000 MANUAL
0001 AUTO
The underline on the setting item denotes the initial setting.
This sets the position of the characters on the horizontal plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3 connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO 3 even if SUPER OFF has been set. However,
when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3 connector.
<Notes>
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has
been set. However, when the menu is exited, operation
complies with the SUPER OFF/ON setting.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This selects the display type for the super display output to the
VIDEO OUT 3/SERIAL OUT 3 connector as well as for dis-
plays such as the setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
This sets the VTR’s recording and playback format.
0: This selects 422 (50M).
1: Selects 411 (25M).
<Note>
Editing is not possible in the 411 mode.
This selects the tape playback format.
0: Compliance with the setup menu No. 012 (SYS FORMAT)
setting.
1: Compliance with the format in which the tape was
recorded.
<Notes>
•
When an editing mode has been selected, the “MANUAL”
setting is forcibly established for internal operations.
•
There is no automatic setting in the 525/625 mode.