Filter
Top Products
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
3
Setting
q Press [ENTER] to import the image.
Direct Image Capture (Only for remote control)
If you would like to capture a picture, press and hold [OSD] (CAPTURE) for
more than 2 seconds.
Subsequent steps are the same as the steps
w described above.
w Press [[] or []] to select a save area.
¡You can store five images at maximum.
¡The existing image is replaced with a new image when saving an image in
an area. Check the right-hand smaller image on the screen before saving a
new one. If you would like to keep the existing image, do not overwrite.
e Press [ENTER] to save the image.
[OSD]
(CAPTURE)
[}] [{]
[]][[ ]
(Select)
[ENTER]
[MODE]
(End)
[MENU]
r Image saving completed.
Notes:
¡Do not turn off the unit while saving an image.
¡To capture an image from TV, the broadcasting conditions should be
excellent.