Filter
Top Products
P
R
N
D
2
L
P
a
n
a
s
o
n
i
c
REVERSE
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must be
connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Notes:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord @7 if needed.
Connection with Rear View Camera
Note: Refer to the operating instructions for the connected devices, in addition.
Rear View Camera (option)
(Video)
(Yellow)
RCA Cord (Option)
Rear View Camera
Control Unit
(option)
Hide-away Unit
(Front)
CQ-VD7200U
Display Unit (Rear)
(Video)
(Yellow)
@6 Power Connector
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
Reverse lamp
Clip connector
(Option)
Battery
Car chassis
Transmission gear
Cut here.
Reverse Lead (Violet/white stripe)
Camera Input
80 81
71
E
N
G
L
I
S
H
72
E
N
G
L
I
S
H
CQ-VD7200U CQ-VD7200U
Electrical Connections (continued)