Filter
Top Products
10
Connections
Connecting to a television only
Connections
Before connection, turn off all connected equipment and read the appropriate
operating instructions.
Select the connection pattern that matches your environment from patterns A-E.
Choose from one of the connection types A-E that suits your requirement.
Use of the supplied RF coaxial cables
To prevent interference patterns from appearing on your TV, use only the supplied RF
coaxial cables when you connect this unit to your TV and aerial outlet or aerial cable,
as shown in connection types A-E.
!
Keep the RF coaxial cables as far away as possible from other cables.
!
Do not roll up the RF coaxial cables.
Connection with 21-pin Scart cable (not provided)
You need a fully wired 21-pin Scart cable for this optimal connection type.
11
After completing the above connections, proceed to the Auto-Setup
to tune in TV Channels.
1 Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2 Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3 Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the TV.
4 Connect the DVD Recorder and the television to the power supply system.
A
10
AUDIO OUT
L
R
OPTICAL
VIDEO OUT
S VIDEO OUT
COMPONENT VIDEO OUT
Y
P
P
B
R
RF OUT
RF IN
AV 2 (EXT)
AV 1 (TV)
AC IN
AV OUT
4
RF IN
AV IN
4
2
3
1
Television’s rear panel
This unit’s rear panel
RF coaxial cable
RF coaxial cable
(included)
Fully wired 21-pin
Scart cable
(For Q Link functions)
To household
mains socket
AC mains lead
(included)
Connect only after all other
connections are complete.
To household mains socket
(AC 220 V to 240 V, 50 Hz)
17