Filter
Top Products
FUNCTIONS
DVD
HDD
VHS
FUNCTIONS
ShowView Rec
To Others
Input ShowView number 0-9, and press ENTER.
ShowView
Record
ENTER
RETURN
Number
Remain HDD 35:06 SP DVD 1:02 SP
VHS --:-- -- 12:40:46 24. 2. FRI
0
9
ShowView Record
The Timer Recording screen appears with the transferred data. Missing or incorrectly
transferred data can be corrected as described on page 50.
Entering a ShowView Code causes the data for programmes provided by broadcasters
to be saved. The appropriate codes can be found in newspapers and TV guides. You
can programme up to 32 programmes per month in advance.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Confirm [ShowView Record] with ENTER.
!
Enter the ShowView Code with the number buttons.
Delete a number with .
!
Confirm the ShowView Code with ENTER.
!
Press ENTER to save the programme.
Press ENTER to input a programme.
ENTER
RETURN
Delete
SP
3 Euros 11.03. SAT 14:00 16:00
Ü
Name Date Start Stop Drive Mode
Timer
Recording
Remain HDD 35:23 SP DVD 1:02 SP
VHS --:-- -- 12:40:46 24. 2. FRI
All Services: Eurosport
Motors
Programme Name
DVD
TM
is a trademark of Gemstar Development Corporation.
The SHOWVIEW system is manufactured under licence from Gemstar Development
Corporation.
Setting for external units (EXT LINK)
You control the recording function via an external unit (e.g. a receiver) with EXT LINK.
Connect the unit to the AV2 terminal with a 21-pin Scart cable.
Switching the DVD Recorder to recording standby mode
The beginning of the recording may notbe recorded correctly.
!
Press FUNCTIONS, select [To Others] with and press ENTER.
!
Select [Setup] with and press ENTER.
!
Select [Connection] with and [AV2 Settings] with , and press ENTER.
!
Select [Ext Link] with and confirm with ENTER.
!
Select [Ext Link 1] or [Ext Link 2] with and confirm with ENTER.
!
Press RETURN several times, in order to return to the television picture.
!
Press EXT LINK to switch off recording standby mode.
EXT-L disappears from the display.
!
Select recording drive DVD or VHS with DRIVE SELECT.
!
Press EXT LINK.
Recording standby mode for EXT LINK-controlled recordings is activated. The
selected drive and EXT-L appear on the display.
The programming for a Timer Recording takes place on an external unit. Read the
operating instructions for your external unit.
Recording programming on an external unit
The recording begins if an appropriate signal is received from a connected unit. As
long as a signal is transmitted by the external unit, the selected drive will record it.
!
Stop the transfer of the recording signal on the external unit.
Switching off recording standby mode
Timer Recording via external units
Prematurely cancelling recording
!
Press EXT LINK to switch off recording standby mode.
EXT-L disappears from the display.
Ext Link 1: For digital receivers that send a
special recording control signal, e.g.
the F.U.N. receiver (TU-DSF41).
Ext Link 2: External recording control for
satellite or digital receivers (video signal).
The Ext Link 2 setting cannot be used if the
input signal is in NTSC format.
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
AV2 Input
Video
AV2 Settings
Ext Link
Ext Link 2
Ext Link 1
Ext Link
Ext Link 2
VHS
SELECT
RETURN
ENTER
52
EXT LINK
Playback during Ext Link mode
!
Press DIRECT NAVIGATOR.
!
Select a title with and start playback with ENTER.
!
Press STOP or DIRECT NAVIGATOR to end playback.
!
Press RETURN to leave the DIRECT NAVIGATOR.
RAM
HDD