Filter
Top Products
If you programmed the Timer programmes one after the other in sequential
order, the first few seconds of the second Timer Recording are not recorded.
With other types of discs, it is approx. 30 seconds.
Timer Recording
Backup recording
The unit automatically switches over to HDD if the selected DVD does not have
sufficient storage space for the programmed recording.
If a Timer Recording starts on DVD while the COPYING function is active, the unit
automatically saves the recording on HDD.
FUNCTIONS
FUNCTIONS
To Others
DVD
HDD
VHS
Press ENTER to input a programme name.
ENTER
RETURN
Delete
SP
3 Euros 11.03. SAT 14:00 16:00
Ü
Please set Channel.
Timer
Recording
ENTER
RETURN
Name Date Start Stop Drive Mode
- -.- -.- -
- -:- -
- -:- -
SP
Programme Name
Number
---
Remain HDD 35:23 SP DVD 1:02 SP
VHS --:-- -- 12:40:46 24. 2. FRI
Name Date Start Stop Drive Mode
DVD
Timer
Recording
Remain HDD 35:23 SP DVD 1:02 SP
VHS 4:02 SP 12:40:46 24. 2. FRI
0
9
Drive : Select the drive.
Mode : Recording mode DVD/HDD: XP, LP, EP, SP, FR
: Recording mode VHS: SP, LP, EP, AUTO
RENEW : [On]: For HDD, the date is set to daily or e.g. [MON - SAT].
The old recording is overwritten with the new recording.
[Off]: The recordings take place continuously.
9936
RAM
HDD
Manual programming
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Confirm [Timer Recording] with ENTER.
The Timer Recording screen appears.
!
Confirm [New Timer Programme] with ENTER.
!
Switch to the next entry with and change the setting with .
Make sure that there is a recordable disc or cassette in the selected drive. Otherwise,
the Timer Recording will not run.
Name : Select the programme position/name of the TV station with .
Date : One-time, daily or weekly programming.
Start/Stop : Start time/end of recording. If you press and hold the buttons,
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
!
After you have made your changes, save the programming with ENTER.
!
To enter other programmes, select [New Timer Programme].
!
To enter the title of the recording, select [Programme Name] with and confirm
with ENTER.
!
Enter the desired name in the Programme Name menu.
!
Press STOP to apply the name.
A Timer Recording does not start while a disc is being formatted, deleted or d.
The recording begins afterwards
finalize
.
The unit automatically switches to timer mode at the start time.
REC flashes in the unit's display one minute before the recording is set to start.
If you receive your TV programme via a satellite receiver (digital/analogue)
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
It is always the programme on this set station which is recorded.
Name : Select AV2 as the name of the TV station with .
ENTER
RETURN
Timer Recording
This programme has been stored.
Insert a recordable cassette.
Cannot set timer standby mode.
If you did not insert a cassette or disc,
the following message appears:
Automatic SP/LP switching during a VHS recording
AUTO: If there is insufficient recoding time left on a video cassette, the SP/LP
function switches the video recording speed to LP; NTSC to EP. This ensures that the
programme is recorded in full. Should the remaining recording time on the video
cassette still not be sufficient even in LP mode, then the programme will not be
recorded in full. Automatic switching to EP mode is not possible.
Change Profile
To change the station name manually, you can select the station from the preset
categories and profiles.
!
Press the BLUE button in the Name box to see the first station of the
corresponding category or preset profile.
!
Select the required station with and press ENTER to confirm.
All Services: ------
Change
Profile
All Services: Eurosport
Motors
Programme Name
Timer
Recording
Remain HDD 35:23 SP DVD 2:00 SP
VHS 4:02SP 12:40:46 24. 2. FRI
The remaining time of a VHS cassette will
only be displayed after using a function like
playback, fast forward or such.
50