Filter
Top Products
PLAYBACK
RECORDING
66
76
50
52
25
66
6
66
31
74
74
32
74
71
Playback does not start.
î
No disc or video cassette inserted.
î
The disc is dirty or badly scratched.
î
You inserted a disc that is not suitable for playback.
î
You inserted a blank disc.
DVD-Video will not play.
î
Some DVD-Videos cannot be played if the security level has been changed.
No reaction when PLAY is
pressed.
î
appears on the screen. The procedure is being prevented by the unit or the disc.
î
Child protection has been activated.
A title or chapter is not played
back afer being selected.
î
Some titles or chapters of DVD-Videos are not played back if the security level has
been changed.
Soundtrack/subtitles cannot be
selected or do not match the
language selected in the Setup
menu.
î
The languages were not recorded on the disc.
î
You may need to use the disc menu to select the languages.
î
The subtitles were not recorded on the disc or are not switched on.
The angle cannot be changed.
î
The angle perspective can only be changed for scenes that were recorded from
different angles.
You forgot your security password.
!
Select the DVD drive and, while the disc tray is open, press and hold REC and
PLAY on the unit for at least 5 seconds.
Cannot record.
î
The video cassette is write-protected.
î
Check whether the inserted disc is suitable for recording.
î
The disc is not formatted. Format the disc.
î
The write-protection device on the cartridge is set to "PROTECT".
Deactivate the write-protection.
î
Deactivate the write-protection in the DVD Management menu.
î
The material that you want to record is copy-protected. The number of possible
copies is limited with some programmes.
î
Discs containing PAL and NTSC signals cannot be recorded.
Some or all recorded programmes
were lost.
î
If there is a power cut during recording or processing or if the unit is unplugged
from the power supply the programme may be lost or the disc may be damaged.
Reformat the disc or use a new disc.
Timer Recording
is not functioning.
î
The Timer programming is defective, different Timer programmes overlap each
other. Correct the programming.
î
Check the clock setting.
Timer Recording
cannot be cancelled.
!
With an EXT LINK-controlled recording via an external unit, press EXT LINK.
The EXT-L display disappears.
î
If you want to cancel the recording prematurely, stop the transfer of recording
signal on the external unit. Press EXT LINK to switch off recording standby.
If you need help
Page
SOFTWARE UPDATE
72
When are the software updates
broadcast ?
î
The unit shows automatically when a software update has been broadcast, and
also automatically updates the software if thIs function has not been switched off
in the Setup menu.
27
27
76
80