Filter
Top Products
AV OUT
AUDIO OUT
COMPONENT VIDEO OUT
Y
P
P
B
R
S VIDEO OUT
COMPONENT
VIDEO IN
DVD Recorder
COMPONENT
VIDEO OUT
Y
P
P
B
R
COMPONENT VIDEO OUT
COMPONENT
VIDEO IN
DVD Recorder
COMPONENT
VIDEO OUT
Y
P
P
B
R
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
TV
Y PB PR
Audioinput L/R
COMPONENT
VIDEO IN
Video cable
Audio cable
Y - Green
PB - Blue
PR - Red
L - White
R - Red
Setup
TV Aspect
Progressive
TV System
4:3
On
PAL
AV1 Output
Video
AV2 Settings
Tuning
Disc
Picture
Sound
Display
Connection
Others
VHS
SELECT
RETURN
ENTER
TAB
69
69
COMPONENT VIDEO OUT terminal
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal.
Connections via these terminals output the colour difference signals (PB/PR) and the
brightness signal (Y) separately.
Colours can be reproduced true to the original colour.
The properties of the COMPONENT VIDEO input terminal are dependent on the
TV or screen.
!
Connect the COMPONENT VIDEO OUT sockets of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a Video cable.
!
Always connect terminals with the same colour.
!
Connect the audio cables to the corresponding audio input terminal on the TV.
Connecting a TV with COMPONENT VIDEO input terminals
If your TV with LCD or plasma screen supports the progressive process, connect it
to the COMPONENT VIDEO OUT terminal.
If you want to enjoy full progressive video, set Progressive to [On].
LCD/plasma television or LCD projector
If progressive output is used, videos can be viewed
in High Resolution, for example from DVD-Video.
COMPONENT VIDEO OUT on this unit is
connected with the COMPONENT VIDEO IN on the
television. Select the [Progressive - On] setting.
Progressive output
Conventional televisions
On a normal television, Progressive output can
cause flickering even if the television is
Progressive-compatible. Select the [Progressive
- Off] setting.
Progressive-compatible televisions (PAL)
Progressive output
HDMI Settings
Active Antenna
Off
19
Progressive television picture
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with
a picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
With a normal television, the progressive output can cause the picture to flicker,
even if the television is progressive-compatible.
Select the setting [Progressive - Off].
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminal.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal,
output is Interlace regardless of the settings.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Setup] with and confirm with ENTER.
!
Select [Connection] with , [Progressive] with , and confirm with ENTER.
!
Select the option [On] with and confirm with ENTER.
!
Press RETURN several times, in order to return to the television picture.
Setup
TV Aspect
Progressive
TV System
4:3
On
PAL
AV1 Output
Video
AV2 Settings
Tuning
Disc
Picture
Sound
Display
Connection
Others
VHS
SELECT
RETURN
ENTER
TAB
HDMI Settings
Active Antenna
Off
Video ( with component )
AV1 Output
RGB 1 ( without component )
RGB 2 ( without component )
RGB output is available all the
time while this unit is on.