Filter
Top Products
FUNCTIONS
DVD
HDD
VHS
LC
KO
SD
SETUP
Setup
FUNCTIONS
Sound
Setting
ENTER
ENTER
Option
DVD-V
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Dynamic Range Compression
Audio Mode for XP Recording
Bilingual Audio Selection
Digital Audio Output
Dolby Digital
Off
M1
VHS
TAB
SELECT
RETURN
ENTER
Audio Mode for DV Input
Stereo1
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
PCM Down Conversion
MPEG
Dolby Digital
PCM
Off
Bitstream
Digital Audio Output
DTS
Bitstream
VHS
SELECT
RETURN
ENTER
Bitstream
Dolby Digital
PCM
-R
+R
-RW(V)
+R DL
-R DL
+RW
To Others
Bilingual Audio Selection
Dynamic Range Compression
Digital Audio Output
[PCM Down Conversion]
[Dolby Digital] [DTS] [MPEG]
[M 1] [M 2]
On: The level of quieter passages increases and the level of louder passages
decreases. The audio can be clearly understood even when the volume is lowered.
If you want to record programmes that are broadcast in dual-channel sound, you can
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.
Select the appropriate setting if you have connected an external unit to the
DIGITAL AUDIO OUT of the DVD Recorder.
[On] [Off] (Dolby Digital Only)
PCM Down Conversion
[On] [Off]
Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2
kHz. Signals are output as 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Audio Mode for DV Input
[Bitstream] [PCM]
[Stereo 1] [Stereo 2] [Mix]
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or
loudspeakers. Make the necessary changes depending on your audio system.
Select the audio type when copying from the DV input.
Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over
Audio Mode for XP Recording
[Dolby Digital] [LPCM]
Selection of the audio type when copying in XP mode.
The picture quality of LPCM recordings may be worse than with normal recordings in XP
mode.
-R
+R
-RW(V)
+R DL
-R DL
+RW
Display
Setting
ENTER
ENTER
Option
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Language
On-Screen Messages
Grey Background
English
5 sec
On
FL Display
Bright
VHS
TAB
SELECT
RETURN
On-Screen Messages
You can set the duration of on-screen displays.
Grey Background
FL Display
On: The grey background is displayed when there is no analogue television reception.
[Off][3 sec][5 sec][7 sec][10 sec]
[On] [Off]
[Bright] [Dim]
Language
Select the menu language.
[English][Deutsch]
Dim: The display goes dark during playback. It lights up again when a button is pushed.
If the unit is switched off, the display turns off.
68