Filter
Top Products
6
7 m
Remote control
signal sensor
Trademark Code
Panasonic 01-04,45
AIWA 35
AKAI 27,30
BLAUPUNKT 09
BRANDT 10,15
BUSH 05,06
CURTIS 31
DESMET 05,31,33
DUAL 05,06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
Trademark Code
SANYO 21
SBR 06
SCHNEIDER 05,06,29-31
SELECO 06,25
SHARP 18
SIEMENS 09
SINUDYNE 05,06,33
SONY 08
TELEFUNKEN 10-14
THOMSON 10,15,44
TOSHIBA 16
WHITE WESTINGHOUSE 05,06
Trademark Code
NOKIA 25-27
NORDMENDE 10
ORION 37
PHILIPS 05,06
PHONOLA 31,33
PIONEER 38
PYE 05,06
RADIOLA 05,06
SABA 10
SALORA 26
SAMSUNG 31,32,43
SANSUI 05,31,33
Trademark Code
GOODMANS 05,06,31
GRUNDIG 09
HITACHI 22,23,31,40-42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17,39
LOEWE 07
METZ 28,31
MITSUBISHI 06,19,20
MIVAR 24
NEC 36
Point the remote control at the sensor of the unit. Avoid obstacles along the
transmission path. The maximum reach of the remote control is 7 metres directly in
front of the unit. Make sure that the transmission window and the sensor on the unit
are clean. The process can be impaired by direct sunlight and glass cabinet doors.
Child protection
You can lock the buttons on the unit and the remote control.
!
Press and hold the RETURN and ENTER buttons until [X HOLD] appears in the
display. The buttons on the unit are locked.
!
To unlock the child protection, repeat the process until [X HOLD] disappears.
Operating a television
Change the code on the remote control to control your TV.
!
Press and hold the TV on and off button.
!
Enter the two-digit code for your television.
Switching to AV input on your Panasonic television
!
Press AV.
Switches between TV reception and AV input each time the button is pressed.
Some television models of the listed brands (e.g. older Panasonic units) cannot be
controlled via the remote control.
Setting up the remote control
If you are using another Panasonic unit at the same location, change the setting of
the remote control so that you can operate the units independently of each other.
Apply the selected setting [DVD 1, 2 or 3] to the remote control.
!
Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at
least 2 seconds.
!
Exit the menu with RETURN.
Set up the remote control for the unit.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Setup] with and confirm with ENTER.
!
Select [Others] with , [Remote Control] with and confirm with ENTER.
!
Select [DVD 1, 2 or 3] with and confirm with ENTER.
If the remote control setting does not match that of the unit, DVD 1, 2 or 3 appears on
the unit’s display.
!
Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for
at least 2 seconds.
If you want to operate two units independently of each other using the same
remote control, then change the the remote control setting.
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Remote Control
Clock
Power Save
DVD 1
Quick Start
On
VHS
DivX Registration
System Update
DVD 1
Remote Control
DVD 2
DVD 3
SELECT
RETURN
ENTER
Off
Remote Control
Initialize