Filter
Top Products
– 14 –
(6) Use [ , ] to select the TV aspect and press
[ENTER].
To return to the previous screen
Press [RETURN].
For your reference:
Apart from “TV Aspect”, other settings also affect how video
appears on your monitor television. Check the following if video
doesn’t appear correctly on your monitor television.
• “Connection”–“Norm (4:3) TV Settings (DVD)” or “Norm (4:3) TV
Settings (DVD-RAM)”.
• The video setting on the disc.
How video appears is often specified by the disc itself.
• The video settings on your monitor television.
• 4:3 (factory setting)
• 16:9
Connecting and Setting up (continued)
RS-232C terminal
POWER
BUSY
STOP REV PAUSEPLAY FWD
REMAIN
REC
MENU
REPEAT
ENTER
SHIFT
RETURN
MARKER
FUNCTION
SEARCH
STATUS
OPEN/CLOSE
PHONES
MODE LOCK
CH1/MIC
CH1
MIN
MAXMIN MAXMIN MAX
OFF ON
CH2
CH2
GB
REC
INHIBIT
DVD VIDEO RECORDER
4.7
MIC
VIDEO
VIDEO
S-VIDEO
S-VIDEO
1
2
Y
CH1(A)
DV IN RS-232C USB
~ AC IN
PAUSE
REMOTE
CH2(B) CH1 CH2
P
B PR
VIDEO IN
VIDEO OUT
AUDIO IN AUDIO OUT
AUDIO
MON
RS-232C
RS-232C cable (9P straight)
USB terminal
VIDEO
VIDEO
S-VIDEO
S-VIDEO
1
2
Y
CH1(A)
DV IN RS-232C USB
~ AC IN
PAUSE
REMOTE
CH2(B) CH1 CH2
P
B PR
VIDEO IN
VIDEO OUT
AUDIO IN AUDIO OUT
AUDIO
MON
Type-B
connector
Type-A
connector
USB cable
USB
Notes:
• When a microphone is connected, the sound recorded to
channel 2 is that selected in “Audio CH assignment with Mic”.
• Use a microphone with the monaural mini plug. When using a
condenser microphone, select the one with built-in batteries.
If you record while a microphone is connected, microphone signal
can be recorded in channel 1.
Connecting a Microphone
Various controls are available if you connect a computer through
the RS-232C or USB terminals.
Connecting a PC
The aspect ratio is factory set to 4:3 for a regular monitor television.
You do not have to change this setting if you have a regular 4:3
aspect monitor television.
(1) Turn on the monitor television and select the
appropriate video input to suit the connections to
this unit.
(2) While stopped, press [MENU (SHIFT + SEARCH) ]
to show the MENU window.
(3) Use [ , , , ] to select the “SETUP” and
press [ENTER].
(4) Use [ , ] to select the “Connection” and
press [ ] or [ ].
(5) Use [ , ] to select “TV Aspect” and press
[ENTER].
TV screen type (TV Aspect)
Use the following procedures to change the settings if
necessary. For other items, see page 33.