Panasonic LQ-MD800P DVD Recorder User Manual


 
32
Entering titles
To correct a character
(1) Use [
, , ,
] to select the character you want to
correct in the title field.
(2) Press [ ]. (You can also erase characters by using [
,
, ,
] to select ERASE and pressing [ENTER].)
(3) Use [
, , ,
] to select the correct character and
press [ENTER].
Notes:
You cannot enter titles if the program is protected. Release the
protection with the search program.
You cannot enter titles unless the Disc Protection in DISC
INFORMATION is Off.
You cannot enter titles if the disc is protected with the write
protect tab.
If you enter a long title, only part of it is shown in the program list
and play list screen.
This window shows the text you have entered (Title
field)
ERASE [ ]
SET [ ] (when you have finished entering text)
SPACE
To finish entering the title
Press [ ].
(You can also finish entering the title by using [
, , ,
]
to select SET and pressing [ENTER].)
You can:
Title discs with the DISC INFORMATION in the MENU window.
Title programs with the SEARCH.
Title play lists with the PLAY LIST screen.
DVD-RRAM
(1) Insert a disc with something recorded on it and
select the DISC INFORMATION, SERCH
PROGRAM, or PLAY LIST screen.
(2) After the titling screen appears, use [ , , ,
] to select the character you want to enter and
press [ENTER].
You can enter the following characters.
Entering titles
To enter characters
Use [
, , ,
] to select the character you want to enter
and press [ENTER].
To erase characters
Press [ ].
(You can also erase characters by using [
, , ,
] to
select ERASE and pressing [ENTER].)
To enter other characters
Repeat steps (1) and (2).
(3) Press [ ]. (You can also finish entering the title
by using [ , , , ] to select SET and
pressing [ENTER].)
The title is entered and the screen disappears.
To stop partway through
Press [RETURN].
(does not save any title information.)