Filter
Top Products
– 30 –
Using the PLAY LIST to edit programs (continued)
(9) Use [ , ] to select “Exit” and press [ENTER].
To re-edit another scene
(1) Use [ , ] after step (8) to select “Next” or “Back” and
press [ENTER] until you find the scene you want to re-edit.
(2) Repeat steps (6)–(8) to continue re-editing other scenes.
Note:
• You cannot specify an end point before a start point or a start
point after an end point.
For your reference:
• You can fast-forward, rewind, pause and slow-motion while
playing scenes just as you can during normal.
• The selected scene is erased from the play list.
To erase other scene
Repeat steps (6) and (7).
To stop partway
Select “No” in step (7) and press [ENTER] or [RETURN].
For your reference:
• The play list itself is erased if you erase all the scenes in it.
(8) Use search functions such as fast-forward and
slow-motion to find the end point of the scene
and press [ENTER].
(6) Use [ , , , ] to select the scene you want
to erase and press [ENTER].
(7) Use [ ] to select “Yes” and press [ENTER].
(6) Use [ , , , ] to select the scene you want
to move and press [ENTER].
(7) Use [ , , , ] to select the scene currently
in the position to which you want to move the
scene and press [ENTER].
• The scene you selected in step (6) moves to the position in
front of the scene selected.
To move another scene
Repeat steps (6) and (7).
(6) Use [ , , , ] to select the scene you want
to re-edit and press [ENTER].
(7) Use search function such as fast-forward and
slow-motion to find the start point of the scene
and press [ENTER].
After performing steps (1) to (4) of “Adding Scenes
to a PLAY LIST”, perform the following steps:
(5) Use [ , ] to select “Move” and press
[ENTER].
RAM
Moving a Scene (Move)
After performing steps (1) to (4) of “Adding Scenes
to a PLAY LIST”, perform the following steps:
(5) Use [ , ] to select “Re-edit” and press
[ENTER].
RAM
To re-edit a PLAY LIST Scene (Re-edit)
After performing steps (1) to (4) of “Adding Scenes
to a PLAY LIST”, perform the following steps:
(5) Use [ , ] to select “Erase” and press [ENTER].
RAM
Erasing a Scene from a PLAY LIST
(Erase)