Filter
Top Products
VHS
Operations
Playback
15
≥When the unit is off, an inserted video cassette can be played back by pressing [ 1] (PLAY).
≥You can eject tapes when the unit is in standby mode. It switches back to standby once it ejects the
tape.
≥When the tape reaches its end, this unit automatically rewinds it to the beginning. During timer
recording, OTR and fast-forwarding, this function does not work.
Notes:
≥Jet Search, cue, review or slow playback will be automatically released after 10 minutes, and for still
playback, it will be released after 5 minutes.
≥The tape counter does not appear during Jet Rewind.
≥Depending on a cassette or the operating condition, Jet Rewind may not work or change the rewind
speed somewhat.
≥During playback function other than normal playback, horizontal noise bars may appear in the
picture, the colour of the picture may be unstable, or the picture may be otherwise distorted.
≥When you play back a tape recorded in the LP mode, the picture may be turned into monochrome.
≥When you play back a tape recorded in the EP mode, the picture and the sound may be unstable.
However, these are not malfunctions.
The unit usually makes tracking adjustments, but you may need to do it manually, if noise appears on
a tape recorded on other equipment.
..............................................................................................................................................................................................................................................................................................................................
During play, press [TRACKING/V-LOCK] J or I.
Repeat until the noise disappears.
Adjust the vertical to stop the picture jiggling while paused.
..............................................................................................................................................................................................................................................................................................................................
While paused, press [TRACKING/V-LOCK] J or I.
Repeat until the jiggling stops.
¬ To return to auto tracking
Press both [TRACKING/V-LOCK] J and I simultaneously.
¬ To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Notes:
≥This may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical with [CH]JIon the unit
.
Tapes recorded in the NTSC system can be played back via a PAL system TV.
≥To record in the NTSC system, set “NTSC INPUT SELECT” (OPTION l 24).
≥Select “on PAL TV” in “NTSC PB SELECT” to view the NTSC recording in colour (OPTION l 24).
≥On some TVs, the playback picture may roll up or down. If your TV has V-HOLD control or
equivalent function, use it to adjust the picture.
Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL
system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images
play back by this function cannot be recorded correctly on other VHS.
Other convenient functions
Adjusting the playback picture
Manual tracking
Vertical locking adjustment
NTSC Playback
VP32GCS.book 15 ページ ２００４年６月１１日 金曜日 午後４時３６分