Filter
Top Products
20
Search Functions
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS].
This unit can display a list of the recorded programmes on the inserted video cassette on the TV screen.
You can then select the desired programme, and this unit will quickly reach its beginning and start
playback.
.............................................................................................................................................................................................................................................................................................................................
[1] Press [NAVI].
≥When pressing [NAVI] during playback, the playback stops
and the Jet Navigator list appears.
................................................................................................................................................................................................................
[2] Press [NAVI] several times to select
the programme.
After 3 seconds, the unit starts to search for the beginning of
the selected programme and the playback will start
automatically.
≥Every time you press [NAVI], the cursor shifts above.
¬ To cancel the Jet Navigator list
Press [MENU].
¬ To delete the Jet Navigator data of a single video cassette tape
Keep [CANCEL/RESET] pressed for more than 5 seconds while the Jet Navigator list appears.
“- -” appears on the list.
¬ To delete all the Jet Navigator data stored in the unit’s memory (l 24)
¬ To demonstrate the Jet Navigator function
Keep [NAVI] pressed for more than 5 seconds without inserting a tape.
Notes:
≥The Jet Navigator programme list displays up to 14 programmes. If you have already stored 14
programmes on a tape and then store another one, the oldest item is replaced.
≥Signals approximately 10 seconds before and after the current tape position are checked. During
checking, “CHECKING JET NAVIGATOR DATA.” is displayed on the TV screen.
≥Checking cannot be performed properly where there are no signals, such as unrecorded portions of the
tape. In this case, press [NAVI] at a portion of the tape where a programme has been recorded on this
unit. When a signal can still not be found, the message “CAN NOT FIND JET NAVIGATOR DATA.”
appears on the TV.
≥The Jet Navigator list is stored in each tape. Up to 20 tapes and 50 programmes can be registered.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA.” appears when you try to store more
than 50 programmes. The new item is added and the oldest item is deleted.
≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DELETE JET NAVIGATOR DATA.” appears when
you try to store items for more than 20 tapes. Programmes recorded without deleting data as instructed
are not registered in the list.
≥The list does not appear when playing tapes recorded on other equipment.
≥When recording over the same location on a tape, it may not work correctly.
NAVI
PROG
PLAY
VHS
CANCEL/RESET
VHS
SLOW/
SEARCH
REW
FF
VHS/DVD
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LISTDIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
REC MODE
VHS/DVD
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/-
-
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
DVD-RAM
DUBBING
PROG PLAY
INPUT SELECT VHS STATUS
DVD STATUSPICTURE MODEGROUP
NAVI
MENU
CANCEL/
RESET
ENTER
REC
TIMER
Jet Navigator
To save Jet Navigator data
≥The tape length of the inserted cassette must be set correctly. (l 24)
≥The unit must not be in the timer recording standby mode.
≥A programme of at least 15 minutes must be recorded on the tape.
1) Press [MENU] to display the VHS MENU.
2) Press [34] to select “OPTION” and then press [ENTER].
3) Press [34] to select “JET NAVIGATOR” and then select “ON”
with [21].
4) Record programmes (l 16 – 19).
The unit makes the list as you record.
OPTION
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [ON]
DELETE NAVIDATA [NO]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
DUBBING NORMAL AUDIO [L]
END :MENU
SELECT:
END : MENU
JET NAVIGATOR
SELECT : NAVI,
1
DATE CH ON CATEGORY
10/18 1
22
:
30 MUSIC
10/19 24
15
:
00 SPORT
10/21 5 22
:
15
10/23 A2 20
:
02
10/26 4 19
:
1
0 EDUCA
10/27 2 20
:
02
10/27 12 20
:
30
1
Time Stamp Function
When playback starts after searching with Jet Navigator function or
index search function (l 21), recorded programming data (called Time
Stamp) appears on the TV screen for approx. 5 seconds.
Note:
≥Time Stamp does not appear if the beginning of the Jet Navigator data
is not recorded 10 minutes before and after the current tape position
even when index signals are recorded.
CH 2
10/29. SA
ON 20:02
VP32GCS.book 20 ページ ２００４年６月１１日 金曜日 午後４時３６分