Filter
Top Products
42
Recording from DVD to VHS
You can record the contents of the disc onto a video cassette.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Insert a video cassette with an intact erasure prevention tab.
≥Press [VHS].
≥Select the desired recording mode (l 16).
Only discs not copy protected can be used.
≥Set “On-Screen Messages” to “Off” (SETUP menu l 41).
≥Insert the disc to be played (l 26). When you copy NTSC discs, select “NTSC” in “NTSC Disc Output”
(SETUP menul 41).
..........................................................................................................................................................................................................................................................................................................................................
[1] Press [INPUT SELECT] repeatedly.
Select “dc” channel.
≥Recording is allowed only when the VHS input channel is set to “dc” (l below).
..........................................................................................................................................................................................................................................................................................................................................
[2] Press [DVD], then press [1] (PLAY).
Start playing the disc and find the playing start point.
..........................................................................................................................................................................................................................................................................................................................................
[3] Press [;/D].
..........................................................................................................................................................................................................................................................................................................................................
[4] Press [VHS], then press [1] (PLAY).
Start playing the video cassette and find the recording start point.
..........................................................................................................................................................................................................................................................................................................................................
[5] Press [;/D], then press [REC¥].
Put the unit in the recording standby mode.
..........................................................................................................................................................................................................................................................................................................................................
[6] Press [;/D].
VHS recording and disc play start at the same time.
¬ To stop recording
1) Press [∫]. Recording will stop.
2) Press [DVD], and press [∫]. Disc play will stop.
Notes:
≥You can select the audio channel to be recorded on the Normal audio track when dubbing a bilingual
DVD (l 24).
≥If a copy protected disc is inserted, “COPYING OF THIS MATERIAL IS NOT ALLOWED.” is displayed
on the TV screen. If you proceed with the recording, the video recorded will be distorted.
[RAM[
You can copy programmes on a DVD-RAM disc to a video cassette with One-touch operation.
≥This function allows DVD-RAM discs recorded by Panasonic DVD recorders to be dubbed.
≥Insert the disc containing the programme to be copied (l 26).
≥This function allows you to record a whole content on a disc automatically. Confirm that the remaining
tape time is sufficient for recording.
..........................................................................................................................................................................................................................................................................................................................................
While stopped, press and hold [DVD-RAM DUBBING] for 5
seconds or more.
When the disc is played all of a content or the tape reaches its end, this unit automatically stops dubbing.
≥The message is displayed on TV screen for a few seconds when DVD-RAM dubbing is completed.
¬ To stop recording
Press [∫].
¬ When “ ” and “ ” is flashing
Check the settings again.
Notes:
≥In this function, the index signal is automatically added on the tape for each of the programmes. You can
find the desired programme with these index signals (l 21).
≥This function does not work during timer recording standby mode.
≥When the dubbing starts, “On-Screen Messages” in the SETUP menu is automatically set to “Off”. The
“dc” channel is automatically selected (l below).
≥If you press [DVD-RAM DUBBING] when “ ” in the unit’s display flashes (Resume function l 26),
the dubbing starts at the stop position memorized.
≥[VHS/DVD OUTPUT] does not work during this function provided that deck selection in Option screen
for OUT [VHS/DVD] is “AUTO”.
DVD-RAM DUBBING
DVD-RAM
DUBBING
AV
ENHANCER
PLAY
STOP
REC
INPUT
SELECT
DVD-RAM
DUBBING
SLOW/
SEARCH
REW
FF
VHS/DVD
VHS
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LISTDIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
REC MODE
DVD/VHS
CANCEL/RESET
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/-
-
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
DVD-RAM
DUBBING
PROG PLAY
INPUT SELECT VHS STATUS
DVD STATUSPICTURE MODEGROUP
NAVI
DVD
REC
MODE
VHS
Manual Dubbing
DVD-RAM Dubbing
“dc” channel
≥When the disc is played with the “dc” channel set, the TV screen displays the disc video, but the
VHS/DVD output has been switched to VHS.
VP32GCS.book 42 ページ ２００４年６月１１日 金曜日 午後４時３６分