Panasonic NV-VP32 Series DVD Player User Manual


 
VHS
Operations
Recording
17
You can start recording quickly and set a duration.
..............................................................................................................................................................................................................................................................................................................................
During recording, press [¥REC/OTR] on the unit repeatedly.
Select the desired recording duration.
Each time you press the button, the indication on the unit’s display changes as follows:
Counter display (normal recording mode)>OFF 30 (min.)>OFF 60 (min.)>OFF 90 (min.)>
OFF 120 (min.)>OFF 180 (min.)>OFF 240 (min.)>Current time (normal recording mode)
The unit will automatically switch off when OTR is completed.
¬ To stop OTR at any time
Press [] or [Í/I] (VHSÍ).
Notes:
The OTR function works during normal recording only.
When the tape reaches its end during OTR, the unit will turn itself off.
You can record from other video sources (VHS, camera, etc.).
Connect the other equipment to this unit as shown. If audio output on the other equipment is
monaural, use a stereo-monaural conversion cable (not supplied).
Insert a recorded cassette tape with an intact erasure prevention tab.
Set A1 or A2 with [INPUT SELECT] to select the audio/video source required.
..............................................................................................................................................................................................................................................................................................................................
[1] Press [1] (PLAY).
Find the recording start point.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [;/D], then press [REC¥].
Put the unit in the recording standby mode.
..............................................................................................................................................................................................................................................................................................................................
[3] Start play on the other equipment.
..............................................................................................................................................................................................................................................................................................................................
[4] Press [;/D] to start recording.
¬ To stop recording
Press [].
You can delete all contents in a cassette’s (the picture, the sound and the Jet Navigator data).
..............................................................................................................................................................................................................................................................................................................................
[1] Insert a cassette that you want to delete the cassette’s
contents.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [MENU] to display the main menu on the screen.
..............................................................................................................................................................................................................................................................................................................................
[3] Press [34] to select the “TAPE REFRESH”, and press
[ENTER].
..............................................................................................................................................................................................................................................................................................................................
[4] Press [ENTER] for 2 seconds or more to start the tape
refresh function.
The tape refresh function starts.
The tape is rewound to the beginning, and it is fast-forwarded with erasing the tape.
When the tape reaches the end, this unit automatically rewinds it to the beginning.
Note:
When a video cassette with a broken erasure prevention tab is inserted, this function is not
activated.
One-Touch Recording (OTR)
/ I
EJECT
FULL-OPEN
PLAY
/REW FF/
STOP
CH
REC/OTR
LR
j
AUDIO
j
VIDEO
AV2 IN
REC/OTR
STOP
Recording from an external source
AUDIO
OUT
LR
VIDEO
OUT
R-AUDIO-L
VIDEO
R-AUDIO-L
VIDEO
VHS/DVD
OUT
AV1 IN
/ I
EJECT
FULL-OPEN
PLAY
/REW FF/
STOP
CH
REC/OTR
LR
j
AUDIO
j
VIDEO
AV2 I N
AV2 IN (AUDIO/VIDEO)
AV1 IN (AUDIO/VIDEO)
Other VHS or Video
movie camera
(Not supplied)
TAPE REFRESH
ª For recordings while “JET NAVIGATOR” is set to “ON”
Be sure to set “JET NAVIGATOR” to “ON” (OPTION l 24).
ª For recordings while “JET NAVIGATOR” is set to “OFF” or
recordings on another VHS
Be sure to set “JET NAVIGATOR” to “OFF” (OPTION l 24).
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
SELECT
END
: , ENTER
:MENU
VHS MENU
TAPE REFRESH
START:ENTER
END:STOP
LANGUAGE
VP32GCS.book 17 ページ 2004年6月11日 金曜日 午後4時36分