Filter
Top Products
Settings Using the On-Screen Display
24
Press [34] to select the item and press [21] to change the
setting.
¬ To exit the settings screen
Press [MENU] twice.
OPTION
AUDIO
CANCEL/
RESET
MENU
ENTER
VHS
STATUS
VHS
CANCEL/RESET
SLOW/
SEARCH
REW
FF
VHS/DVD
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LISTDIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
REC MODE
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/-
-
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
DVD-RAM
DUBBING
PROG PLAY
INPUT SELECT VHS STATUS
DVD STATUSPICTURE MODEGROUP
NAVI
OPTION
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
DUBBING NORMAL AUDIO [L]
END :MENU
SELECT:
Items Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (l 25).
AUTO
: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
AUTO
: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
on PAL TV
: TVs that can receive PAL signals
4.43: TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
JET NAVIGATOR (l 20) ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA (l 20) NO
ENTER: If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
OSD (l 25) AUTO
: Messages appear on the TV for about 5 seconds
when you press [VHS STATUS].
OFF: Messages do not appear.
OUT [VHS/DVD] (l 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VHS: Only VHS outputs
MANUAL: VHS output and DVD output are manually switched.
AUTO
: VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
DUBBING NORMAL AUDIO (l 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
L
: To record the sound from left channel
R: To record the sound from right channel
VP32GCS.book 24 ページ ２００４年６月１１日 金曜日 午後４時３６分