Filter
Top Products
22
Playing discs (continued)
Skipping
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]
You can skip to the beginning of tracks (page 71) and chapters
(page 71) and restart play from there.
On DVD-RAM and DVD-R, you can skip to the start of a
programme and start play from there.
The section between the point where recording is started and the
point where it is stopped is called a “programme”.
During play or while paused
Press [:, SKIP] or [9, SKIP] (6).
[:]: backward
[9]: forward
Each press increases the number of skips.
For your reference
≥After skipping, the unit returns to the previous state, play or
pause.
≥Press [1] (21) to restart play if it was paused.
≥Pressing [:] or [9] (6) while a DVD menu is being shown
or while the playback control feature on Video CDs (page 71) is
working may take you to a menu screen.
≥You can also mark positions to skip to (page 24).
(1) Play position
(2) Twice
(3) Once
(4) Chapter/track
(1) Play position
(2) Marker
(3) Twice
(4) Once
(5) Three times
(6) The programme before
(7) Current programme
(8) The programme after
Starting play from a selected programme,
title, chapter or track
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]
Remote control only
Preparation
Switch [DVD, TV] (15) to “DVD”.
During play
Press the numeric buttons (4) to select the item.
(page 4)
≥This works only when stopped with some discs (the screen saver
is on the television).
Manual Skip
[RAM] [DVD-R]
Remote control only
You can skip commercials easily with this feature.
Preparation
Switch [DVD, TV] (15) to “DVD”.
During play
Press [MANUAL SKIP] (24).
Play restarts from approximately 30 seconds later.
Selecting an amount of time to skip—
Time Slip
[RAM] [DVD-R]
You can set an amount of time and then skip with one press of a
button.
Preparation
Switch [DVD, TV] (15) to “DVD”.
1 During play
Press [TIME SLIP] (25).
2 Within 5 seconds
Press [3, 4] (10) to enter the time and press
[ENTER] (10).
≥Play skips the time you entered.
≥Press [3] (10) to increase or [4] (10) to decrease in one-
minute units. Press and hold [3] (10) to increase or [4] (10)
to decrease in 10-minute units.
Note
You cannot use this feature while a “DIRECT NAVIGATOR”
(page 41) or “PLAY LIST” (page 45) screen is being displayed.
[:]
[9]
(1)
(2) (2)
(3) (3)
(4) (4)
(4)
[:]
[9]
(1) (2)
(3) (3)
(4) (4)
(5)
(6)
(7)
(8)
0 min
–5 min