Filter
Top Products
151
Error Messages
A message may appear while you are operating the DVD Video Camera. If a message appears, refer to
the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Message Cause & Troubleshooting
Reference
page
(1) Data error in a part of
image file. Repair data
now?
(2) Found error in image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
It is possible that the system cannot normally complete writing of file
when, for example, power is turned off for some reason during
recording or editing (deleting, dividing or combining scenes, or
creating play list). Selecting “YES” will automatically repair the
video file, but even if “NO” is selected, the same message will
appear when the DVD Video Camera is turned on next time. (Do not
remove the disc while the DVD Video Camera is recognizing it:
ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Data may not be repaired, depending on the timing when power
was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time of repair is added to the repaired data (only
the corrected portion for partial repair), the original date/time
information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost.
(In case of message (2) (3) only)
• See *1 on page 156.
⎯
(1) This disc must be
formatted before it can
be used by this camera.
(2) Do not format this
disc if you want to record
from the PC connection
terminal.
(3) Format the disc now?
DVD-R disc that was not initialized for camera use was inserted.
47
Battery is almost empty.
Replace it.
Replace with a charged battery pack, or use AC adaptor to power
the DVD Video Camera.
42, 45
Cannot combine
scenes.
Unless consecutive scenes are selected, they cannot be combined.
107
Cannot combine.
Deselect PHOTO
scenes.
Select only movies and combine them.
107
Cannot combine scenes
of multiple programs.
Scenes cannot be combined, because the programs are different.
Create a play list first, and then combine scenes.
116
Cannot combine. Select
multiple scenes.
Select a range of at least 2 scenes to be combined, and then
combine them.
107
Cannot delete scenes. This may occur when scene that was edited for division, etc. is to be
deleted.
Combine the divided scenes, and then delete them.
107
Cannot execute.
Change display
category to ALL.
This message will appear if you attempt to combine or move scenes
with “Category: VIDEO or PHOTO” specified. 128
VDR-M95M75M55M53PP.book Page 151 Tuesday, March 29, 2005 2:19 PM