Filter
Top Products
79
lFlow of Menus
Refer to page indicated for details about each function. Movie functions are described below.
Camera Functions Setup
Program AE (P. 80)
White balance (P. 81)
EIS
*1
(P. 83)
Digital zoom (P. 57)
Wind Cut
*1
(P. 83)
Flash
*2 *3
(P. 68)
Recording Functions Setup
Movie quality
*4
(P. 84)
Wide screen
*5
(P. 86)
Input selection (P. 88)
External still input
*6
(P. 88)
Self-timer
*2
(P. 89)
On-screen information
display output
*7
(P. 90)
*1: Not displayed with stills
*2: Displayed only with stills
*3: If a separately sold Flash is connected, it is given
priority. (Only VDR-M95PP.)
*4: “Quality” mode will appear when using card (P. 85)
*5: Not displayed on VDR-M53PP/VDR-M55PP.
*6: Displayed when DVD-RAM disc (PHOTO mode) or
card is used, and input selection is set to external
signal or S external signal.
*7: Displayed only when input source is set to
“CAMERA”
Date Setup
Date setting (P. 40)
Display format (P. 41)
LCD/EVF Setup
Adjust (P. 91)
EVF Display (P. 92)
Initial Setup
Beep (P. 93)
Power Save (P. 93)
Recording LED (P. 94)
Language selection (P. 94)
Reset (P. 95)
You can use the control buttons on DVD Video Camera to select various setting options in menu.
Note:
• Pressing the MENU button during recording will not work.
• The menu screen will disappear when it is left for approx.
1 minute without any operation.
Camera Functions Setup
On
Auto
RAM
Program AE
White Bal.
Dig.Zoom
EIS
ENTER RETURN
40x
Auto
Wind Cut
Off
:
:
:
:
:
Record Functions Setup
RAM
Wide : 4:3
VIDEO Mode : FINE
Input Source : CAMERA
OSD Output : On
ENTER RETURN
Date Setup
RAM
Date Set
Date Mode:M/D/Y
ENTER RETURN
LCD/EVF Setup
RAM
EVF Display : Auto
Adjust
ENTER RETURN
Initial Setup
RAM
Reset
Language : English
ENTER RETURN
Beep : On
Power Save : Off
Record LED : On
Camera Functions Setup
On
Auto
RAM
Program AE
White Bal.
Dig.Zoom
EIS
ENTER RETURN
40x
Auto
Wind Cut
Off
:
:
:
:
:
Record Functions Setup
RAM
Wide : 4:3
VIDEO Mode : FINE
Input Source : CAMERA
OSD Output : On
ENTER RETURN
Sports
Portrait
Spotlight
Surf&Snow
Low Light
Auto
RAM
Program AE
White Bal.
Dig.Zoom
Wind Cut
EIS
ENTER RETURN
Camera Functions Setup
or
or
Press the A button directly to choose an option from menu.
To return to the previous screen, press the
C button.
Pressing the MENU button again will cause the menu screen to
disappear.
Press the MENU button.
VDR-M95M75M55M53PP.book Page 79 Tuesday, March 29, 2005 2:19 PM