Panasonic VDR-M75PP DVD Player User Manual


 
38
Viewing Image on LCD Monitor Screen
1 Open the LCD monitor.
The LCD monitor has a spot where you can hook
your finger. Hook the finger there to open the
monitor.
Note:
See “LCD/EVF Setup” (P.92) for information on
displaying the viewfinder image regardless of whether
the LCD monitor is open or closed.
lRange of LCD monitor movement
The LCD monitor can be opened up to approximately
90°.
If the LCD monitor is open 90°, the screen can be
tilted down by as much as 90°, and can also be tilted
up and turned up to 180° so the screen faces in the
same direction as the lens.
If the LCD monitor is turned 180° so the screen
faces in the same direction as the lens during
recording, subject image will also appear in the
viewfinder as a mirror image (left/right reversed).
Tilt the LCD monitor to adjust its vertical angle so
that you can easily see the screen .
Note:
If no image appears on LCD monitor screen, refer to
“Check 7” on page 150.
Be sure to open the LCD monitor approximately 90°
before changing its vertical angle.
Do not record for a prolonged time with the LCD monitor
facing outside in close contact with the DVD Video
Camera body (see diagram, right): Doing this could
cause the DVD Video Camera and LCD monitor to
become hot.
Grab the bottom
with your finger
and pull it out.
90°
180°
VDR-M95M75M55M53PP.book Page 38 Tuesday, March 29, 2005 2:19 PM