Filter
Top Products
161
An image that should
have been recorded
does not appear when
DVD-MovieAlbumSE is
started.
Click the “Preference” button at top right of DVD-MovieAlbumSE
screen, click the “Device Setting” tab to choose the drive where
DVD-RAM disc is loaded in the “Drive Select” column, and then click
“OK”.
⎯
The DISC EJECT lever
does not work.
• Insert DVD-RAM discs in the camera before connecting the DVD
Video Camera to your computer. The cover of the disc insertion
block may not open after the camera is connected to a computer
in some cases.
• After files are exported from DVD-MovieAlbum, a confirmation
message is displayed about ejecting DVD-RAM discs. Select
“Eject the disc being used.”
143
No USB HS (high speed)
connection even when
USB2.0 card is used.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker in
order to operate the USB2.0 card at HS (high speed).
⎯
When executing “Export”
on DVD-MovieAlbumSE,
it takes much time to
read.
• If stills are included in the range of “export”, it may take more time
because data must be re-encoded and read.
• If “Divide by Chapter” is not chosen, it may take some time
because data will be read while being re-encoded.
143
Symptom Cause and Correction
Reference
page
VDR-M95M75M55M53PP.book Page 161 Tuesday, March 29, 2005 2:19 PM