Filter
Top Products
Pelco Manual C1927M (5/99) 15
Figure 9. Front Panel, 9-Channel Color Simplex Multiplexer
DISPLAY
RECORD
Sim
DISPLAY
RECORD
Sim
Figure 10. Front Panel, 16-Channel Color Simplex Multiplexer
MULTIPLEXER WITH MX4000SVR SERVER
Refer to Figure 3 in the
Applications
section for an overview of a typical installation.
1. Follow the instructions in the
Basic Installation
section to mount the multiplexer; to
connect cameras, VCR, and alarms; and to power-up the multiplexer. Skip the
Monitors
section
.
2. Proceed to the MX4000SVR Genex™ Multiplexer Server Installation/Operation
Manual to complete the installation. Also use the server manual to program the server.
3. Refer to this manual to program the multiplexer.
OPERATION
Refer to Figures 9 and 10 for views of the front panels. Monochrome front panels are the
same except for the word “Monochrome” instead of “Color” in the lower left corner.
There are three modes of operation that are selected by pressing the DISPLAY/RECORD
button: RECORD, LIVE, VCR. The LED illuminates in the RECORD mode only. When the
LED is off, look at the upper left corner of the monitor to see if the multiplexer is in the LIVE
or VCR mode. The default mode is RECORD.