Filter
Top Products
18 Pelco Manual C1927M (5/99)
OPERATION FRONT PANEL COMMAND
Sequence PIP display. 1. Push the button.
(Does not work in RECORD 2. Push the SEQUENCE button.
or VCR modes)
Stop a sequence. Press the SEQUENCE button once or press any
CAMERA button to stop a sequence on the main
monitor. Press the SEQUENCE button twice to
stop a sequence on the spot monitor.
Zoom on a camera. 1. Press the CAMERA button for the camera on
which you want to zoom.
(Does not work in RECORD
mode) 2. Press the button below the ZOOM icon. The
display will zoom to 2X magnification.
3. Use the arrow buttons to control the zoom loca-
tion.
4. Press the zoom button a second time to
increase the zoom to 4X.
5. To exit, press the zoom button a third time.
Record a tape. Recording is done automatically as long as a VCR
is connected and both the multiplexer and VCR
are in the RECORD mode. While the multiplexer
is in the RECORD mode (RECORD LED is on),
you can only see a full-screen view of one camera
(or one camera at a time if sequencing) on the
main monitor.
Play a tape. 1. Make sure the RECORD LED on the left of the
front panel is OFF. If the light is not off, press
the DISPLAY/RECORD button until the monitor
shows VCR mode.
2. Turn on the VCR and press the PLAY button.
3. Press the button of the camera you want to
view, or press a button below the 4, 9, or 16
icons for multiple camera playback.
1. For a single alarm, press the VIEW button once.
2. For multiple alarms press the VIEW button
once each time a camera with an alarm
sequences to the main monitor.
1. For a single alarm, press the VIEW button
twice.
2. For multiple alarms, press the VIEW button
twice each time a camera with an alarm
sequences to the spot monitor.
1. Press the VIEW button twice to display the
alarm list.
2. Press the VIEW button twice to clear the list
and close the log.
3. Press any CAMERA or the VIEW button once
to close the log without clearing the alarm list.
Table C. Operation Guide (Continued)
RESULT
Sequences all active cameras in
the PIP display.
Stops the sequence. The monitor
displays video from the camera on
which the sequence stops.
Stops a sequence if one is in pro-
gress. Displays a 2X or 4X zoom of
the camera selected on the main
monitor.
Records all cameras connected to
the multiplexer.
Displays the recorded cameras in
the selected format on the main
monitor.
Deactivates the alarm.
Deactivates the alarms.
Deactivates the alarm.
Deactivates the alarms.
Displays or removes alarm list on
the main monitor.
Deactivate alarm(s) for
camera displayed on the
main monitor
Deactivate alarm(s) for
camera displayed on the
spot monitor.
Open or close a log of the last
20 alarms.