Filter
Top Products
10 Pelco Manual C649M (7/99)
S-VHS ET Mode—This mode, using VHS tape, has picture quality closer to
S-VHS recording (over 400 lines).
High Density Recording - H·D<EP>–High density recording records three
times more fields than normal density (SP). It reduces the time interval between
pictures and makes for smoother time-lapse recording.
Tape Remaining Indicator–A bar indicator shows how much tape is left and/
or that the tape has approximately three minutes (in 2H mode) left.
Automatic Head Cleaning–The VCR automatically removes foreign matter
from the heads when a cassette is inserted for continuous smooth operation.
Easy Setup Using A Monitor–The on-screen menus simplify setup program-
ming. You can select these menus even without inputting a video signal.
Easy Cueing With Alarm Recording–Index signals are automatically added
at the beginning of alarm recording for easy cueing. You can confirm alarm starting
time in the playback video on the monitor or in the alarm list on the Maintenance
menu.
Time And Date Search System–You can search for a specific hour/minute
and date to accurately locate an image on tape.
External Time Clock Adjustment–You can reset the on-screen clock to the
nearest hour by applying a signal to the RST (reset) IN terminal at the rear of the
VCR.
Record Check–You can confirm correct recording by pressing the PLAY button
during recording.
Automatic Head Azimuth Selection–The VCR can automatically select play-
back heads for normal VHS-compatible time-lapse recordings, or older time-lapse
recordings made using two same-azimuth video heads. Same-azimuth time-lapse
recordings use VHS cassettes but cannot be played normally by VHS-compatible
VCRs.
Special Playback Features–These include still images, speed search, re-
verse playback, frame-by-frame viewing in both directions, slow-motion, and high-
speed viewing.
JOG Dial/SHUTTLE Ring–You can use these controls to search for the desired
image. You can adjust the playback speed with the SHUTTLE ring and search for
an image frame-by-frame with the JOG dial.
Recording Options–This versatile system offers a variety of recording options,
including daily and weekly timer recording, repeat, and alarm recording.
Protection Against Power Failures—Recording data (including date, time,
and timer setup) is stored in backup memory, so the system can resume recording
after a power failure. The monitor displays the time of the failure.
Digital <ELAPSED TIME> Display–The elapsed time of recording and play-
back is stored in non-volatile memory. You can use the elapsed time display as a
guide to when to do periodic maintenance.
Tape Use Counter–This counter displays how many times you have recorded
on a tape. This helps you decide when you need to replace a tape.
Daylight Saving Time Setting–A daylight saving time setting is available. You
can set the clock forward an hour by programming the menu.
NOTE:
The battery backup is for
memory only–the VCR does not
continue recording if the power
goes out. If you want to keep re-
cording during an outage, make
sure the VCR system is on your
UPS (uninterruptible power supply)
system.