Filter
Top Products
42 Pelco Manual C649M (7/99)
9.1.1 Playback Mode
• Tape recorded in SP mode:
When you press the REC/PLAY MODE button, playback mode is switched in
the following order: 2H, L24H, 24H, 48H, 72H, 96H, 120H, 168H, 0H, 2H.
• Tape recorded in EP mode:
When you press the REC/PLAY MODE button, playback mode is switched in
the following order: 6H, L18H, 48H, 72H, 96H, 120H, 168H, 0H, 6H.
9.1.2 Audio Playback
Modes with the letter “L” (L18H or L24H) are for audio recording and playback on
the linear track.
Playback Mode 2H 6H L18H L24H 24H – 168H
Audio Playback Available Available Available Available Not Available
Picture Quality Good Good Vibrating Vibrating Less Vibrating
NOTES:
• There is normal sound playback only when a tape recorded in 2H –
L24H modes is played back in its respective mode.
• If a recording is played back in a higher mode than that in which it
was recorded, the picture is played back in slow motion. If played
back in a lower mode than that in which it was recorded, the picture is
played back in fast motion.
• The picture may move up/down or noise may occur when a tape is
played back in L18H, L24H, 24H - 168H mode (even if the tape was
recorded in L18H, L24H, 48H - 168H mode).
9.1.3 End Of Tape
When the end of the tape is reached, the following functions are performed auto-
matically during playback or fast forwarding.
Table H. Audio Playback Availability
Tape End Selected REPEAT or ALARM•PROT STOP or REWIND
Playback The tape automatically Stop
rewinds to the beginning and stops.
Fast Forward Stop Stop
9.2 SPECIAL EFFECTS PLAYBACK
The VCR features the following convenient functions. Audio output is muted during
special effects playback.
Table I. End of Tape Actions