Filter
Top Products
16 Pelco Manual C649M (7/99)
1. M (counter memory) indicator
Illuminates during rewind for counter memory mode.
2. PL (power loss) indicator
Illuminates when there is a power failure during record-
ing.
3. ALARM indicator
Flashes during alarm recording and stays on when the
alarm recording is finished.
4. INDEX indicator
Flashes during recording of the date/hour index at the
change of the hour, and during recording of the alarm
index signal. It lights during an index search.
5. MODE display
Displays the selected recording or playback mode. Dur-
ing an index search, it displays the index number. It will
also indicate the playback head selection—SH or AH—
three seconds after the playback starts or if the playback
mode is changed. In the First Time Set Up menu, if the
PB HEAD selection is set to L/L or R/R, then SH will be
illuminated. If set to AUTO, then AH will be illuminated.
(Refer to “PB HEAD SELECT” in Section 6.10 for more
information.)
NOTE:
SH or AH lights during playback in SP mode ONLY.
6. SKIP indicator
Illuminates during skip search.
7. Record mode indicator
EP illuminated means the VCR is either recording or
playing back a tape recorded in EP mode. SP means
the same, but for SP mode.
Figure 4. Fluorescent Display
5.2 FLUORESCENT DISPLAY
8. S-VHS indicator
Illuminates when the VCR is playing back a tape recorded
in S-VHS and S-VHS ET modes or when the S-VHS switch
is ON while recording.
9. Repeat indicator
Illuminated when TAPE END in the First Time Set Up menu
is set to REPEAT or ALARM•PROT.
10. Cassette status indicator
Illuminates when you insert the tape. The light advances,
stops, or flashes corresponding to the movement of the
tape.
11. Timer recording indicator
Illuminates when the TIMER REC button is set to ON.
12. Tape remaining indicator
Indicates the approximate tape position (S = start, E =
end).
13. REC indicator
Illuminates during recording.
14. PLAY indicator
Illuminates during playback.
15. EMGCY (emergency recording) indicator
Illuminates when EMERGENCY REC in the Recording Set
Up menu is set to ON.
16. LOCK indicator
Illuminates when the lock feature is in use.
17. Counter display
Indicates the relative position of the tape.
PLAY
EMGCY
H
SKIP
SE
LOCK
M PL
SP EP
ALARM
INDEX
MODE
REC
VHS
S
17
16 15
14
13
12
11
10
9
8
7
654321