Filter
Top Products
46 Pelco Manual C649M (7/99)
9.4.2 Picture Quality Adjustment
This control lets you adjust the playback picture so the outline is sharper or softer.
Figure 31. Picture Quality Adjustment
9.4.3 Vertical Adjustment
Do the following to reduce or eliminate picture vibration at the top and bottom.
1. If the vibration occurs in still, slow motion, fast playback (x2), or normal play-
back in 24H – 168H or 0H mode, play a tape recorded in 2H or 6H mode on
this VCR and press the PAUSE/SHUTTLE HOLD button.
If the vibration occurs during normal playback in L24H mode, play a tape in its
playback mode.
2. Press the POSITION/VERTICAL ADJUST buttons (+ or -) to reduce or elimi-
nate picture vibration.
Figure 32. Vertical Picture Adjustment
NOTE:
This control is effective
only during playback.
NOTES:
• Picture vibration in L18H play-
back mode is not adjustable with
the POSITION/VERTICAL AD-
JUST buttons.
• Horizontal vibration is not adjust-
able with the POSITION/VERTI-
CAL ADJUST buttons.
• To return vertical adjustment to
its initial setting, press the PO-
SITION/VERTICAL ADJUST
buttons (+ or -) at the same time
during still playback.
PICTURE
SOFT SHARP
SOFT
SHARP
WHEN THE PICTURE
IS VIBRATING
TRACKING
POSITION/
VERTICAL
ADJUST
TRACKING
POSITION/
VERTICAL
ADJUST