Filter
Top Products
C1696M (8/06) 27
VIEWING A SPECIFIC CAMERA
When you select a camera, its video stream is sent to the video pane with the green border. For example, if your display is set to a 2x2 layout and
the upper left video pane is selected, you can select any camera to display in this video pane. Follow the instructions below to display video for a
specific camera in any video pane or to display a specific camera and switch to full-screen mode.
Figure 22. Displaying Video in a 2x2 Mode
To view a camera in a specific video pane:
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. Refer to Navigating Through Menus with the KBD5000 Keyboard on
page 4 and Navigating Through Menus with a PC Keyboard and Mouse on page 6 for alternate keystrokes if you are using either of these devices.
1. In the live video mode, use the joystick to navigate to the selected video pane. A green border surrounds the video pane.
2. On the Panel Keypad, press Menu . The DVR5100 menu appears. The DVR5100 will display the last menu that was opened. In the
figure below, the main menu is shown.
Figure 23. Main Menu
3. Use the joystick or jog (inner dial) to navigate to the Cameras icon, and then press Enter/Shift . The Camera menu appears.
Figure 24. Camera Menu